Eutelsat service with "AYECKA Inside"
AYECKA IoT Terminal Over Eutelsat Service meet IoT First
IoT First ™ offers high performance and availability, unique all outdoor configuration, operates with a small dish, ideal for installation at remote sites. supports Ku band for both reception and transmission for transactional message-based large network random traffic profiles.
The terminal is competitively priced, in terms of both initial capital expenses and ongoing operating costs.
All Outdoor Integrated Modem Router and RFT.
Low cost terminal.
Supports Eutelsat “IoT First” network.
Efficient access scheme resulting in low service.
Reuse of existing infrastructure.
Single RG6 Coax cable.
Smart Grid and SCADA.
Message-based, Random Access, Large Scale Networks.
Inbound F-SIM, ESSA
Modulation Outbound QPSK, 8PSK,16APSK, 32APSK
Modulation Inbound BPSK FEC rate 1/3 as per FSIM standard with carriable spreading
Channel Rate Outbound Up to 60 Msps and 80Mbps sustainable user data
Channel Rate inbound Up to 150Kbps instantaneous user trac
Inbound Channel bandwidth 2.5, 5, 10 MHz
Antenna size From 74 Cm (40 cm possible with long spreading sequences). 75cm antenna is type approved by Eutelsat.
Functionality Integrated, all in one: feeds array, RF Router and modem
Transmit Frequency Ku: 13.75 – 14.5 GHz
Receive Frequency Ku: 10.7 – 12.75 GHz (dual band)
Connection to IDU F-Type (Ethernet Over Coax)
Tx Output Power Ku: 1W
Encapsulation Rx: MPE TX: RLE
Maintenance Software, Firmware and boot loader are eld upgradable using OTA protocol (Flute)
Networking DHCP, NAT/PAT, SSDP, VLan
IP Routing Multicast and Unicast, Static and Dynamic
ODU weight ~1kg
Form factor 160 x 76 x 144 mm
Management Web GUI, REST
Operating Temp. -33° to 55° C
Rain 0% to 100% non-condensing
ODU IDU Interface Functionality Power up the ODU by DC/Coax
Interfaces Towards ODU F-type
ODU to IDU cable RG6, 75 Ohms, up to 100m
Certificates CE, FCC, IP65